Different types of ARDUINO boards

-

The list of Arduino boards includes the following such as


Image result for arduino all boards


  1. Arduino Uno (R3)
  2. LilyPad 
  3. Red Board
  4. Arduino Mega (R3)
  5. Arduino Leonardo


Comments

Post a Comment

Popular posts from this blog

Snake game using arduino uno and led dot matrix display MAX7219

-
Image
 Snake game using arduino uno and led dot matrix display MAX7219 Components required Arduino UNO R3 LED dot matrix display MAX7219 Dual axis XY joystick module 10k ohm potentiometer  Bread board  Jumper wire Circuit diagram Connections Connect the +5v  and GND pin of the joystick to 5v and GND pin of arduino. Connect the VRX and VRY pins of joystick to A1 and A2 pin of arduino . Connect the Vcc and GND pins of LED display to 5v and GND pins of arduino. Connect the DIN, CS & CLK PIN OF LED display to 12, 11 &10 pins of arduino. Connect the 1st fixed end of the POT to the 5v pin of arduino and 2nd fixed end to GND of arduino. Connect the variable end of POT to the A5 pin of the arduino. CODE #include "LedControl.h" // LedControl library is used for controlling a LED matrix. Find it using Library Manager or download zip here: https://github.com/wayoda/LedControl // --------------------------------------------------------------- // // ------------------------- us...
Read more

Information about H-Bridge

-
Image
Information about H-Bridge H-Bridge module L298N 2A Dual motor driver module with PWM control An H-bridge is a simple circuit that lets you control a DC motor to go backward or forward. You normally use it with a microcontroller, such as an Arduino, to control motors. When you can control two motors to go either forward or backward – you can build yourself a robot! H-Bridge concept Here’s the concept of the H-bridge: A DC motor spins either backward or forward, depending on how you connect the plus and the minus. If you close switch 1 and 4, you have plus connected to the left side of the motor and minus to the other side. And the motor will start spinning in one direction. If you instead close switch 2 and 3, you have plus connected to the right side and minus to the left side. And the motor spins in the opposite direction. The H-Bridge circuit You can build an H-bridge with four transistors. If you’re not sure how the transistor works, I recommend ...
Read more

Information about Ultrasonic sensor

-
Image
Information about Ultrasonic sensor Hi Friends! I hope you are doing well. Welcome you Know To Robo. Today, I’ll discuss the basic  Introduction to HC-SR04 Ultrasonic Sensor . It is an ultrasonic sensor, also known as an ultrasonic transducer that is based on a transmitter and receiver and mainly used to determine the distance from the target object. The amount of time it takes to send and receive waves will determine how far the object is placed from the sensor. It mainly depends on the sound waves working on “non-contact” technology. The required distance of the target object is measured without any damage, giving you accurate and precise details. This sensor comes with a range between 2cm to 400cm and is used in a wide range of applications including speed and direction measurement, wireless charging, humidifiers, medical ultrasonography, sonar, burglar alarms, and non-destructive testing. In this post, I’ll try to cover basic details related to HC-S...
Read more